COOL SHOT™ is the additive that improves the performance of AC/R systems. COOLSHOT produces
colder air, faster and when in heat-pump mode produces hotter air. COOL-SHOT acts as a catalyst without causing chemical changes, it allows the refrigerant gas to flow in direct contact with the surfaces of the pipes to achieve an excellent improvement in performance:
COOL-SHOT produces colder air, up to 5°C (9°F) less, in heat-pump mode produces hotter air, up to 5°C (9°F) more, increases of 73% the heat exchange of the refrigeration lines, reduces the energy consumption of the AC/R of at least 20%, increases of 54% the efficiency of the compressor lubricant prolonging its life by up to 50%, reduces the friction within the compressor thus reducing vibration and noise, it reduces maintenance costs by at least 20% and is also fluorescent when exposed to any UV light.
Why should you get a Cool-Shot injection?
✓ It is an environmentally friendly product since it reduces CO2 emissions, it extends the life of the AC/R system and reduces maintenance costs.
✓ It acts quickly and reduces the vibrations and the noise of the compressor COOL-SHOT is composed of two synthetic catalysts and a lubricating agent
which bring the AC/R systems to a state of
✓ Cool-Shot is suitable for both residential and commercial properties. It eliminates the Oil Fouling phenomenon, namely oil residues attached to the inner walls of the refrigeration lines that hinder the exchange of heat, isolating the refrigerant gas and reducing the performance of the AC/R system.
✓ It will save you up to 20% off your light bill each month. If your average electric bill is 500$ then you could be saving 100$ a month or 1200$ a year!
✓ Within one year of injecting Cool-Shot in your A/C unit, customers will see a drastic difference in their A/C performance as well as paid off their initial investment while continuously receiving long term savings.
Is designed for use in refrigeration, air conditioning, chillers, heat pumps and any hermetic or non-hermetically sealed lubrication systems! Frigi-Tech™ will give new life to bearings, seals, and all compressor parts, increase cooling capacity, quiet compressor noise, and save electricity!
Frigi-Tech™ is compatible with new and old refrigerants as we custom blend to meet manufacturers specifications. Even proven in Ammonia systems
Frigi-Tech™ will not void Manufacturers Warranties
Food grade quality available (Code of Federal Regulations 21CFR178.3570)
“Oil fouling of heat transfer surfaces of air conditioning and refrigeration systems, will cause a loss of about 7% efficiency the first year, 5% the second year and 2% per year the following years.” (per 1998 ASHRAE Handbook, Refrigeration, Chap.2.9)
Frigi-Tech™ restores the heat exchange and any losses of efficiency by remedying the oil fouling that has occurred.
ASTEC Roof Coatings
Astec roof coatings provide a broad spectrum of fluid-applied membrane systems for the sustainable restoration of roofs, walls, tanks, piping, duct work and other industrial surfaces.
ASTEC systems for roofs, walls and industrial applications test beyond typical standards for longevity, wind resistance, durability, pliability, abrasion resistance; as well as protection against salt and other chemicals and corrosives.
ASTEC Ceramic Technology
Proprietary ceramic formulations enhance key properties of elastomeric coatings for strength, UV deterioration, heat resistance, abrasion resistance, and longevity.
A Solar Shield
Ultraviolet reflectance and infrared emissivity, well beyond DOE guidelines, make ASTEC Cool Wall Coatings a top choice wherever exterior solar degradation or interior heat gain are perpetual problems.
Seamless Wind and Weather Protection
Properly prepared walls can be better sustained with the seamless wind and weather protection of ASTEC coatings.
Ceramic Abrasion Resistance
Wind blown sand and grit are shut out by seamless ASTEC walls. Tough ceramic impregnation fights surface erosion.
A Corrosion Barrier
ASTEC elastomeric coatings are highly resistant to ocean salt spray, acid rain, and other airborne contaminants.
Once cured, an ASTEC surface retains its flexible, watertight superiority in extremes of heat or cold; dry or wet conditions.
Reduces Thermal Shock Damage
ASTEC elastomeric coatings stretch to minimize the effects of varying coefficients of expansion within walls that cause damaging shifts, cracking, and loosening conditions.
Green Building Benefits
ASTEC® Cool Wall Coatings are earth-friendly from manufacturing and restorative application through decades of sustainable, easy-care, low-maintenance and energy efficient service.